SB-1800 EVERSEAL Specifications

SB-1800 can be used for truck bodies, vans, cars, garbage and refuse trucks, dumpsters and other vehicle and transportation applications. SB-1800 is a one-part, super high solids, extremely fast curing, easy to apply, long-lasting sealant. It offers excellent sealing qualities to metal, wood, glass, painted steel, aluminum, bonderized metals, resin board, plywood, flakeboard, foam board, composition board, FRP, and most plastics and other rigid building materials. It has instant water resistance upon application and is tack-free in 40 to 60 minutes. SB-1800 does not sag and is ideal for side panel and overhead applications. SB-1800 is perfect for all field applications with an application temperature from -20° to +140°F. For spot-welding, apply SB-1800 between metal for overlap seals and immediately spot-weld through the metal and sealant. SB-1800 has no shrinkage and thus is excellent for sheet metal assembly. It also stays flexible and heat-resistant for years of service. This saves costly secondary sealing operations while producing a far better finish. It reduces sealant usage by 50% and increases efficiency by over 800%.

TYPICAL PROPERTIES:
COLOR: Clear (other colors on special order)
BASE: Everflex Bondaprene high performance rubber
SOLIDS: 100% (No shrinkage)
HARDNESS: 28
TENSILE STRENGTH: Over 360 lbs.
STAINING: None
CURE SYSTSEM: Moisture and air cure
TACK FREE TIME: 40 to 60 minutes
INITIAL SET: 8 hours
CURE TIME: 24 hours
ELONGATION: 450% when fully cured
FUNCTIONAL TEMP: -80° to +480°F
APPLICATION TEMP: -20° to +140°F
CLEAN UP: While uncured remove excess material from tools with xylene - after cure the sealant can be cut away
STORAGE: Up to 12 months stored at 60°F to 70°F 50% R.H.
PACKAGING: 10.3 ounce cartridges, 24 cartridges per case

SB-190 EVERSEAL Specifications

SB-190 is versatile, hard-setting, one-part sealant designed for a wide variety of industrial sealing needs. This unique formula possesses the toughest tensile strength with excellent impact strength. It skins over quickly and is paintable. SB-190 is also used for sealing building panels, doors, windows, glass, air conditioners, etc. It will not bleed or stain and can be used to seal in specialty areas like fiberglass and plastic. It provides a hard, pick-proof sealant with excellent adhesion to most rigid materials.

TYPICAL PROPERTIES
COLOR: Clear (other colors on special order)
BASE: Synthetic rubber
TENSILE STRENGTH: Up to 2,000 pounds
VISCOCITY: Heavy mastic
ELONGATION: Up to 500% in 1/16"
TEAR: Over 300 PLI
TYPE: Solvent release, approx. 60% solids
HARDNESS: 70-80 Shore A
CLEAN UP: Mineral spirits or naptha
STORAGE: Keep above 40°F before use, store upright in a cool place
PACKAGING: 24 cartridges per case, 55 gallon drums

2017 M.M. Products, Inc.
Web Design by NFX Media